What’s new on INFLOR Forest?

The newest INFLOR Forest updates available in this release.

Correctives

[IS-19859] – [117160] – Restrict active vehicle pool configuration
Reported Scenario
The SGF System (“Transport / Configuration / Registration / Vehicle / Set Configuration [4692]”), when registering a new set, the system is presenting in the Drop-down, all vehicles, being “Active” or “Historic”. The System must present, in this field, only the “Active” equipment.
Adopted Solution
The adjustment was made in the SGF.

[IS-20071] – The routine of closing the operational transport calendar is considering, in its consultation, the UG of the association table UG x Uso Solo, when it should consider the UG materialized in the CEM Guide
Reported Scenario
It was not possible to close the operational calendar, because in the PR_CTL_MANTER_APONTAMENTO_CEM procedure, the CD_UNIDADE_GESTAO of the CFG_ASSOC_UNID_GESTAO_USO_SOLO table was being used, and not of the TRA_GUIA_CEM table.
Adopted Solution
A correction was applied in the procedure, so that the UG materialized in the TRA_GUIA_CEM table is filtered.

[IS-21437] – SNINC0353884 – Record sheet interface did not send volume until Inventory
Reported Scenario
The record sheet interface did not send the information limited to the volume of the Inventory, being sent a volume below the expected.
Adopted Solution
It was identified that the interface was considering the adjustments made by the stack measurement and, therefore, SC volume sent was above the Inventory, causing rejection of this data. Thus, the system was changed so that Inventory adjustments are only considered, if they cause a decrease in the total volume in relation to the Inventory, not being considered if they cause an increase in volume in relation to the Inventory.

[IS-21486] – Display volume of future delivery notes in the Wood Sale cube – Note Conference
Reported Scenario
Currently, the Wood Sale cube – Note Conference, displays the volume of invoices for future delivery, when the sales order is from the Cubic Meter unit.
Adopted Solution
It was necessary to change the function F_GET_VOLUME_NOTA, including one more check, for when the sales order is from the TONNED unit of measure. In this case, to obtain the conversion factor through the shipping point, the F_GET_FATOR_CONVERSAO function, which today requires a CD_LOCAL (CD_USO_SOLO) to be passed, has been adjusted to consider the conversion factor at the various levels.

[IS-21523] – Silviculture Bulletin note without indicating Seedlings discarded
Reported Scenario
User informs that, in the Silviculture Bulletin note screen, validations and adjustments in the entry of discarded seedling information are necessary.
Adopted Solution
Creation of validations and adjustments on entry of seedlings information discarded in the appointment.

[IS-21756] – Review blocking of branches by series
Reported Scenario
In the Batch screen in the SGF, the system does not allow registering the same branch in a batch, for different series, however with the 500 series scenario, this is necessary.
Adopted Solution
The validation in the system was changed, which prevented the same branch from being registered in batches of different series, to check if the series has the flag “requires obs cont” marked. If it does, it allows a branch already registered in a batch of another series , is used.

[IS-21882] – Error generating DANFE
Reported Scenario
Some invoices were being rejected by SEFAZ, reporting the error that the date and time of emission was greater the date and time of receiving. After analysis, we found that the system was not validating the emission time and allowed it to be greater than the current system time, what caused the rejection.
Adopted Solution
Validation by the time of issue has been added, preventing an invoice from being issued with the time of issue greater than the current system time.

[IS-21884] – It blocks deleting certificates that have SC association
Reported Scenario
Certification can be deleted even it has SC Association.
Adopted Solution
Included an validation at the system, that blocks deleting certificates that have SC association, when it occurs.

[IS-22128] – Cost cube with different values from SGF Silviculture database
Reported Scenario
User informs that resources without configured accounting account are being associated as third party services.
Adopted Solution
Adjustment at the system, to allocate resources without configuration to the standard G/L account.

[IS-22203] – Export of Forest Registration screen has triple Area_GIS fields
Reported Scenario
When exporting to Excel, on the “Feature/SC” screen, the GIS Area field appeared 3 times, and with different values.
Adopted Solution
Differentiate each Area -> Projected Area, Current Area, Total Area.

[IS-22341] – Correction in data presented in the cube “Budget Processing Data”
Reported Scenario
User informs that actual values of the budget plan, and presented in the cube, are divergent.
Adopted Solution
Correct data filling logic in the cube, filtering only active operations.

Incidents

[IS-20236] – Audit Notification
Reported Scenario
User reports that the routine for sending audit notification emails, is showing errors.
Adopted Solution
The adjustment made to separate the email message by audit, due to the limited number of characters for Varchar2.

[IS-21909] – Disapproval of non-qualified input
Reported Scenario
Input disapproval not enabled.
Adopted Solution
Review on Activation/Inactivation of the “Disapprove” and “Approve” input button.

[IS-22133] – Pricing Bulletins
Reported Scenario
The bulletins were not priced for the closing process.
Adopted Solution
The routine of the Real Tariff’s interface was adjusted, to consider zero value when the cost of the bulletin is null.

[IS-22282] – [142989] SGF PPF – PROBLEM WITH DUPLICITY IN THE SUMS OF PPF REPORTS
Reported Scenario
Duplicate values in the report.
Adopted Solution
Adjustments in the report to remove duplicate information.

Requested Services

[IS-17532] – Transfer and Adjustment of Activities
Reported Scenario
User requests an improvement in the system where, when transferring scheduled operations between work orders, the remaining balance of the production will be considered, if part of it has already been executed.
Adopted Solution
Development of the above system improvement.

[IS-20670] – Mandatory end date on the Patio Bulletin screen
Reported Scenario
Allow the system to manually release the events from the machines, without having to include the end time of the event.
Adopted Solution
The adjustment was made in the SGF.

[IS-21000] – Rule verification for contract creation
Reported Scenario
User informed that there is no validation of the Management Unit when generating a new contract.
Adopted Solution
The adjustment was made so that, when selecting the Management Unit, the contractor field is updated and displays only those referring to the selected Management Unit.

[IS-21856] – Contract Generator v2
Reported Scenario
Contract changes generated for an specific customer.
Adopted Solution
Adjustment was performed as requested by the user.

[IS-21874] – Inclusion cube 373 mother note
Reported Scenario
It is necessary to include the field “Nf-e Invoice” in the Wood Sale cube, which will be filled with the mother note, when it is a future sale note.
Adopted Solution
Included the field “Nf-e Invoice” to all invoice verification cubes, which will be filled in with the “series – number” of the mother invoice, if any.

[IS-22112] – Contract generator v3
Reported Scenario
Request for change in the way the contract is generated.
Adopted Solution
User requests were analyzed, and changes were made, to match the user’s request.

[IS-22454] – Adjustments on the “Silviculture – Conference of Bulletins for Closing” data cube
Reported Scenario
User informs that there is a need to add some fields and filters on the data cube “Silviculture – Conference of Bulletins for Closing”.
Adopted Solution
Adjustments on data cube as requested by customer.